How to adjust your car seat and mirrors

How to adjust your car seat and mirrors? Such a simple question but it is one of the most dangerous source to avoid driving. According to a survey, without proper driving posture and poor vision mirror will directly lead to accidents; do not think this is something that others do not believe now check your own driving position is correct.

First seat height adjustment, up or down to adjust the seat so that there is at least blows the roof off the distance to the head. If the seat is adjusted too high, the vehicle is likely to encounter bumps head roof, too short a tune would affect sight. Then adjust the distance between the front and rear, when the foot brake pedal to stay at the deepest, legs still have a certain amount of bending; but don’t too straight back, best driving state is when the shoulder when relying on natural back, arms straight at the wrist should just be able to ride on the steering wheel, so that when the power to reverse the steering wheel can guarantee the lingua franca, and kilometers per hour, fuel and other functions of the instrument panel display can also be in line of sight. And when hand steering wheel with both hands is preferably on the "3:00" and "9:00" position. Natural thumb resting on the steering wheel spokes. Some drivers like the thumb to the inside, or when turning the direction of play from the back side dig round, in fact, is very dangerous driving habits, the one which would allow the driver to the steering wheel force feedback judgment is unclear, another event when compared there may hurt your fingers when poor road or emergency operations.

Adjust the seat can be adjusted after the mirror; the old drivers know the car has three "behind the eyes", refers to both sides of the mirrors and the interior rearview mirror. For the outside mirrors, the sky and the ground level of the transfer line should be in the upper half of the rear-view mirror, which is outside rearview mirror, you can see two-thirds of the ground, a third of the sky, and this can ensure that most of the roads are seen. When about regulation, should let the body also appeared within sight outside rearview mirror, but not too much, as long as the body can grasp the situation near the line. For not all vision mirrors, it is best to install a large field of view in the mirror corner angle lens, so you can ensure a more comprehensive insight into the road. But do not remodel substandard products, surface some mirror design is unreasonable, but after long-term use can cause the driver's line of sight illusion dangerous. Finally, the adjustment is within the rearview mirror, the driver should be able to sit back rear road clearly observed, in principle, in line with the lower, not higher, in order to acquire more ground information. Moreover, you should pay special attention to the fact that some owners prefer to place bulky items in the vicinity of the rear window, in fact, is the most affected after the concept of effect.

Some car diagnostic tools can help you test your car by yourself, such as: Autel MaxiScan, Autel MaxiDas DS708, Autel MaxiSys Pro MS908P and so on.
Source: http://www.focalobd.com/blog/how-to-adjust-your-car-seat-and-mirrors/

How to prevent electrostatic damage for safe driving

Method 1: Washing and waxing. Wash car wash and wax using specialized anti-static, dust the surface of the car can be, the film clean.

Method 2: Instrument Panel Shop wet towel. Usually put a wet towel on the dashboard, or on a regular basis with a sprayer spray a little water in the car, the car can increase humidity, reduce static electricity inside the car.

Method 3: Drink plenty of water. It is better to prevent the owners from their own internal way of static electricity, the more water can increase the skin's surface humidity, and static electricity in a wet state is not going to happen on their own.

Method 4: Use the key addition to static. Acquire other key contact to drive the car in front of the metal parts of the discharge, but do not car keys, car keys inside with theft because the chip, using the car keys discharge car keys may lose theft effect.

Method 5: less open circulating air conditioning. Open cycle air conditioning inside the autumn season will make the car itself has been very dry moisture memory could not recommend ajar window.

Method 6: rub moisturizer. Late autumn or winter, often rubbing hand cream can not only keep the skin moist, but also anti-static, do both. Some people go to wash your hands before going out to drive would be a good idea.

Method 7: use less chemical supplies. Whether human or vehicle should minimize use the chemical class seat covers and floor mats.

Method 8: Using the discharger. Static discharger on the market with air static discharger and take the chain discharger, the effects were good.

Some car diagnostic tools can help you test your car by yourself, such as: Launch X431 Diagun III, Launch X431 Pro3, Autel MaxiScan JP701 and so on.
Source: http://www.focalobd.com/blog/how-to-prevent-electrostatic-damage-for-safe-driving/

How to proper use of car diagnostic scan tools

Auto diagnostic tools are used to diagnose the engine, brake, vehicle parts and so on. They can be plug into the standardized socket on most vehicles and trucks manufactured after1996. In the fact, using a scan tools can save you many hours of headache in determining the problem with any car. Besides, they are very easy-to-use. A common auto repair shops mechanic can learn to use a diagnostic tool in about five minutes.

Instructions: using a car diagnostic tool
1. Determine the type of diagnostic tool required for your vehicle. There are two main types of sockets, the OBD-1 (On Board Diagnostics) type, which was the main type of socket made before 1990. And the newer OBD-2 socket. They both are simple pin-out designs that will allow access to the computer. The socket is located under the steering wheel, up under the dash board, and could be hidden by wiring or panels.
2. Plug the diagnostic tool’s adapter plug into the vehicle’s computer socket, and turn on the vehicle’s ignition, but do not start it.
3. Turn the diagnostic tool on. The display will come on, and after it communicates with the vehicle’s computer for a few seconds, it will display an “OK” message or a menu.
4. Apply the menu to find the “stored codes”, or the diagnostic codes that the vehicle’s computer has stored into its memory. These codes are collected over time, and unless the vehicle’s battery has been disconnected, they should remain in memory. The scan tool will display these codes, along with basic data information about the code.
5. Write down the codes that are displayed and the check them. Automobile repair manuals for the make and model of vehicle will have a list of these codes and what they mean. Many codes will start with a letter, followed by several numbers, such as “P0233,” and they are tripped by sensor that the computer monitors constantly. When the sensors determine something is wrong with the vehicle, they store the code in the computer so that the mechanic can determine the issue and repair it.

Tips & Warnings
1. Buying a diagnostic tool with several adapters can allow it to diagnose multiple cars.
2. Do not attach the obd2 scanner tool directly to the computer or battery.
Source: http://www.focalobd.com/blog/how-to-proper-use-of-car-diagnostic-scan-tools/

Tire pressure monitoring system reviews

If you car had a low flat tire, what would happen? Keeping a normal tire pressure can make driving safer. An abnormal tire pressure can lead to serious consequences at any minutes.

1. Increasing fuel consumption
When tire pressure is too low, the contact area between the tire trend and ground increase, the friction and resistance increase too, so the fuel consumption increases.

2. Shorten the longevity of the tire
Excessive tire pressure makes the middle of tire trend over-worn; when tire pressure is too low, the sides of the tire trend over-worn. These situations will make the vehicle tire scrap in advance.

3. Reducing brake performance
Excessive tire pressure result in less contact area between the tire trend and ground, reducing the degree of friction, eventually extend the braking distance.

4. Tire may blow up
A report released by National Highway Traffic Safety Administration (NHTSA): tire pressure below 25 % of the standard values, the odds of tire blow up increase threefold; above 25%, the odds double.

Tire for the car is like the feet to human. The tire is the cars’ only component contacting the ground. Driving force and braking force come from the tire, so the safety of the tire is crucial. While the tire pressure monitoring system would play a great part in ensure tire to remain in the best situation.

In conclusion, installing Autel TPMS is essential, because undetected tire flat can result in serious consequences. If you want to avoid abnormal tire pressure in daily driving experience, checking the tire pressure frequently is the basic way. However, for those whose tire gets puncturing in the road, the air leak quietly. If it is left unattended, the tire would blow up in the end. A tire will be wasted. In this condition, have a tire pressure monitoring system is very significant. Nowadays, factory-fresh cars are seldom equipped with TPMS, but you can install it by yourself. The specialist suggests that if condition permit, a TPMS is quietly necessary. 

If your car had some problems in TPMS, you can always buy car diagnostic tools from our website, and then diagnose malfunctions by yourself. These vehicle diagnostic tools are: Launch X431 V Pro, Launch X-431 PAD, Autel MaxiScan VAG405, and so on.
Source: http://www.focalobd.com/blog/tire-pressure-monitoring-system-reviews/

Top 5 ways to improve your car performance

How to improve car performance? Do you want to make your car go faster?  Statistics show that almost every car enthusiast wishes to add more power to their car or wish to improve fuel-efficiency, but how to achieve that? Well, actually car maintenance and repair service provider may be the best solution for improving the performance of your car. With the help of a professional, you will find how a car maintenance and auto repair service can make your car go faster.

How to check engine oil in car

Having the correct amount of oil is important for having a car run at its best. If the oil is too low, there will not be enough lubricant and an engine can burn out quickly. Too much oil can have a similar effect, as the overflow of oil will be whipped into foam by the crankshaft and leak into other parts of the engine, and it can also lead to low oil pressure. Both outcomes can result in major and expensive auto repair being necessary for the car. There are a few good ways to double check that the proper amount of oil is in the car.

White Exhaust Smoke
If thick, white smoke comes out the exhaust pipe, this can be an indication that there is too much oil in the engine. Taking the car to the mechanic immediately is important to minimize the likelihood of permanent damage being done to the engine block. The white smoke is generally an indication that something in the engine is burning, while it may not be oil, if the oil is overflowing and churning into foam, it may start to burn, which would cause the white smoke. This may also be antifreeze burning, so it is best to take the car to the automotive repair, because any of the causes of the smoke can be disastrous for the car.

Dipstick reading
Warm the engine by driving the car a few miles. Proper engine warmth is important to accurately read the amount of oil, as oil expands as it warms. If oil is filled in a car that is cool, once it warms the oil will expand and cause overflow. Once the car is warm, using a dipstick is the most common method of checking the amount. Essentially, the dipstick is a metal rod that is dropped into the oil tank and removed. There will be two marks on the dipstick, one for the low level of oil, and one for the high level. It is important to always be between these two lines.

Leaking Oil
Residual oil can leak from the engine, and end up on the floor beneath the vehicle. Since oil is often spilt when adding it to the engine, so need check engine light, if oil is seen beneath the vehicle in the same spot it was added, it may be nothing. However, if there is oil found beneath the vehicle after it has been moved, then it may be leaking. Checking the oil plug beneath the car is important to make sure that the oil is not leaking from there as well. If the oil plug is loose, then the oil may not be overflowing, but rather draining from the bottom. In this case, your car will run out of oil too quickly, which also causes problems.
Source: http://www.focalobd.com/blog/How-to-check-engine-oil-in-car/

How to using a Laptop as an Automotive Scan Tool

With the development of the technology, modern automobiles now are all equipped with an On-board Diagnostics system (OBD). There are two kinds of OBD. One is OBD-I, the other is OBD-II. As you can guess OBD2 codes is an improvement over OBD-I in both capability and standardization. It is an advanced management system that professionals and backyard mechanics can connect to via the diagnostic port. You can also use a computer or laptop instead of a handheld scanner; however, you will need a kit. Most laptop diagnostic software is more advanced than handheld scanners, offering the ability to monitor check engine performance, as well as read trouble codes.