As to car maintenance, each season has its own protection method. So how should we maintain our car in spring? And how much knowledge do you know about the car maintenance for spring? If you are not clear about it, we sincerely suggest you to go for a special Car Diagnostic Tool Online Shop and to buy a professional tool to do a frequent checking for your car.
First, clean the cooling system
First is the circulatory system, including two parts of oil and water. There is sure to be lots of dust on the car radiator and the condenser of the car air-condition. Some even can cause auto parts damaged early. So should remember to clean the cooling system of your car. And never only clean the appearance of dust of the water tank, and don't flush it directly. The correct method is to loosen the screw that fixed cistern, instead, you should clean both the inside and the outside of the tank with the high pressure air, and then rinse with water.
Second, keep the oil flowing
As to the maintenance of the oil in spring, you’d better choose a professional service station to check the restrictor and the fuel spray nozzle and other parts of your car. If all these parts are not smooth enough, it will increase the fuel consumption of your car.
Third, do a physical examination for the air conditioners
Because the temperature is not stable, it is more necessary to do a full checking for the air conditioning refrigeration. After stopping use for nearly half a year, the air conditioning refrigeration may be leaked. As a result, you should remind the workers to check the spare amount of the refrigerant when cleaning the condenser and water tank. Or you can get it all by yourself with Launch X-431 PAD Universal Auto Diagnostic Scanner or the Autel MaxiSys Pro MS908P Diagnostic Analysis System.
Fourth, change with the summer oil
Though most of the cars have adopted the general oil which can be used for all the season, in some northern cold areas, vehicles still have the difference of the winter oil and the summer oil. Here we will remind most of the car owners of changing with the summer oil.
Fifth, supply with the cooling liquid in time
Next you should check the cooling liquid storage tanks of your car cooling system. In general, the evaporation consumption of the cooling liquid in cold season will be very low. While when entering into Spring, it will increase the consumption of coolant because of the high temperature. So you should check the liquid level frequently and pay attention to add the coolant in time.
Sixth, replace the wiper blade
With the coming of the spring season, there will be more rain. As a result, it should be not ignored to check the windscreen wiper for your loved car. If you need to use the windscreen wiper to clean the front window of your car, you should scrub it with the glass cleaning fluid, which will reduce the early damage of the wiper bar. If still unable to fully scraped with the glass cleaning fluid or can not compact the rubber strip with the wiper strut, and aging, hardening, crack and many other situation appeared with the rubber blade, it’s time to change a new pair of wiper blade.
Seventh, full disinfection for your car
The last but not the least, you should also pay attention to the inner environment of your car. In cold winter, many car owners tend to reduce the times to open their car, as a result, the left Residue and perspiration will be much easier to increase the rise of the mites and all kinds of bacteria because of a comfortable temperature. Besides, there will be also a peculiar smell that caused by the dust, oil contamination and moldy sundry, so it is very necessary to do a full disinfection for your car.
In total, spring car maintenance will be different for different people, cars and places, and there will be different requirements for different cars. Care more to your loved car, so it can do much better serve for you.
More detailed information about the car maintenance please continue to stay tuned for our later news on our Online Auto Diagnostic Tool Store.
Focalobd.com is a professional reliable Auto Diagnostic Tool Supplier, provide a variety of Car Diagnostic Tool, OBD Tool, Auto Code Scanner, Car Diagnostic Software, etc.
2015年3月15日星期日
2015年3月14日星期六
8 Methods to Reduce Tire Wear
Many car owners often met the situation of tires wear, although tire wear will happen frequently, we should also know how to avoid and reduce the wear of the tire. Here we sincerely suggest you to get the help from an Auto Diagnostic Tool Supplier or the vehicle maintenance and repair store. Now let’s have a look at the below methods to reduce the wear of the tire.
1. When parking during the driving or stopped at the destination, you can choose to slide with a safe way by taking the advantage of inertia.
2. When driving through the muddy areas, you should choose where is more solid and will not slide for the sake of sinking with the tire, spinning at the same place, or shaking violently.
3. You should slow down your speed according to the situation of the road and the radius of turning circle when turning to the corner, or it will accelerate the unilateral tire wear because of the effect of the inertia force and centrifugal force.
4. Pay attention to the road situation and people as well as the vehicle dynamic when driving through the crossroads, narrow road or railway crossing. Get ready for braking, and choose the best speed, and then reduce frequent braking and avoid emergency braking in order to reduce the tire wear.
5. When your car is in the state of driving downhill, you should also control the speed according to the size of the slope, length, and road conditions to avoid or less use the emergency braking so as to reduce the wear of your car tires.
6. Slowly when start your car, so that it can be avoided with accelerating the tread wear because of the tire towing with the ground.
7. When driving in a highway maintenance construction location, you should go through at a slow speed to avoid the excessive impact with the tire or stabbed or scratches.
8. Once driving on the uneven roads, you should choose where there is relatively good pavement to reduce the attack from the tire and the ground, and avoid the damaging of the car parts and tires, at the same time, to avoid the tire turbulence and sharp pounding.
Well, have you got it after seeing so many methods? If still have no faith of the safety performance of your car, maybe you can choose a kind of Car Diagnostic Tools which will help you to d a full checking for your car, such as the Autel MaxiDas DS708 and Launch X431 GDS 3G Professional Auto Diagnostic Tool and so on. If you pay more about all about these, we are sure that you will be less troubled by the tire wear and will save more money for you.
Source: http://www.focalobd.com/blog/8-methods-to-reduce-tire-wear/
1. When parking during the driving or stopped at the destination, you can choose to slide with a safe way by taking the advantage of inertia.
2. When driving through the muddy areas, you should choose where is more solid and will not slide for the sake of sinking with the tire, spinning at the same place, or shaking violently.
3. You should slow down your speed according to the situation of the road and the radius of turning circle when turning to the corner, or it will accelerate the unilateral tire wear because of the effect of the inertia force and centrifugal force.
4. Pay attention to the road situation and people as well as the vehicle dynamic when driving through the crossroads, narrow road or railway crossing. Get ready for braking, and choose the best speed, and then reduce frequent braking and avoid emergency braking in order to reduce the tire wear.
5. When your car is in the state of driving downhill, you should also control the speed according to the size of the slope, length, and road conditions to avoid or less use the emergency braking so as to reduce the wear of your car tires.
6. Slowly when start your car, so that it can be avoided with accelerating the tread wear because of the tire towing with the ground.
7. When driving in a highway maintenance construction location, you should go through at a slow speed to avoid the excessive impact with the tire or stabbed or scratches.
8. Once driving on the uneven roads, you should choose where there is relatively good pavement to reduce the attack from the tire and the ground, and avoid the damaging of the car parts and tires, at the same time, to avoid the tire turbulence and sharp pounding.
Well, have you got it after seeing so many methods? If still have no faith of the safety performance of your car, maybe you can choose a kind of Car Diagnostic Tools which will help you to d a full checking for your car, such as the Autel MaxiDas DS708 and Launch X431 GDS 3G Professional Auto Diagnostic Tool and so on. If you pay more about all about these, we are sure that you will be less troubled by the tire wear and will save more money for you.
Source: http://www.focalobd.com/blog/8-methods-to-reduce-tire-wear/
2015年3月13日星期五
Three kinds of methods to solve the problem of automobile horn
Speaker is a device frequently used while driving, like Auto Diagnostic Tool for the mechanic is the same, if the speaker appear problem, it will be very convenient when driving. Sometimes honked the horn, very hoarse, and even a little voice at all. what causes it?
Let's take a look at how the horn works. When you press the horn button on the steering wheel or other locations, the current from the battery flows through the loop on the horn relay solenoid, solenoid relay attract dynamic contact switch is closed, current will flow to the speaker place. Electromagnet current work inside the horn, so that the diaphragm vibration sound. If the problem is not very serious, the owner can solve their own, Launch X-431 PAD and Launch X431 Diagun III Auto Diagnostic tool can check and fix this problem.
The failure in many of the speakers, especially some design defects speaker mounting location, in the rain, very easy to cause the horn drenched by rain, causing damage to the speaker. When the speaker does not ring, common failure parts have no more than 3 points, namely the horn itself, horn switch contacts and the horn wiring harness, when fault occurs can refer to the following steps to check, of course, you also need some car diagnostic tools.
(1) Sometimes does not ring, press the horn switch, if the speaker sometimes loud, sometimes not loud, mostly horn switch contacts inside the contact is not good, and some are also speaker itself.
(2) hoarseness is due to poor contact plugs, especially the various contacts around the steering wheel, as a result of frequent use, easy to make contacts to wear.
(3) does not ring entirely first checks to see if the fuse is blown, then unplug the speaker plug, use a multimeter to measure when the horn switch here has power. If there is no power, check the horn and horn relay harness; if there is electricity, it is the speaker itself is the problem, then you can try to adjust the adjusting nut on the horn to see if sound, or you can use Autel MaxiSys Pro MS908P or Autel MaxiSys MS908 auto tool, if still does not ring, you need to replace the speaker.
Source: http://www.focalobd.com/blog/three-kinds-of-methods-to-solve-the-problem-of-automobile-horn/
Let's take a look at how the horn works. When you press the horn button on the steering wheel or other locations, the current from the battery flows through the loop on the horn relay solenoid, solenoid relay attract dynamic contact switch is closed, current will flow to the speaker place. Electromagnet current work inside the horn, so that the diaphragm vibration sound. If the problem is not very serious, the owner can solve their own, Launch X-431 PAD and Launch X431 Diagun III Auto Diagnostic tool can check and fix this problem.
The failure in many of the speakers, especially some design defects speaker mounting location, in the rain, very easy to cause the horn drenched by rain, causing damage to the speaker. When the speaker does not ring, common failure parts have no more than 3 points, namely the horn itself, horn switch contacts and the horn wiring harness, when fault occurs can refer to the following steps to check, of course, you also need some car diagnostic tools.
(1) Sometimes does not ring, press the horn switch, if the speaker sometimes loud, sometimes not loud, mostly horn switch contacts inside the contact is not good, and some are also speaker itself.
(2) hoarseness is due to poor contact plugs, especially the various contacts around the steering wheel, as a result of frequent use, easy to make contacts to wear.
(3) does not ring entirely first checks to see if the fuse is blown, then unplug the speaker plug, use a multimeter to measure when the horn switch here has power. If there is no power, check the horn and horn relay harness; if there is electricity, it is the speaker itself is the problem, then you can try to adjust the adjusting nut on the horn to see if sound, or you can use Autel MaxiSys Pro MS908P or Autel MaxiSys MS908 auto tool, if still does not ring, you need to replace the speaker.
Source: http://www.focalobd.com/blog/three-kinds-of-methods-to-solve-the-problem-of-automobile-horn/
2015年3月12日星期四
Use and Maintenance Guide of Car Battery
Among all the car maintenance, the battery maintenance is also very important. While many car owners do not pay enough attention and have not a better knowledge of both the using and the maintenance of the car battery. As a result, they have not formed a good using habit and make the battery life shortened, and even do harm to the other electrical equipment. So, how to check whether the battery can still support working with your car? Maybe you can use a car diagnostic tool for help. A common battery life can be up to 2 or 3 years, if unreasonable used, you may change the battery of your car within 4 months.
Well, how to judge whether the battery need charged, and not make it in a state of loss of electricity? You can determine the working state of the battery by the brightness of the headlights or the strength of the stereo sound. If you wait until the brightness of the light become dark, the power storage would have entered into a state of loss of electricity and unable to start. In order to guarantee the normal work of the battery car owners should better start the engine to recharge it for every half an hour after the using of the battery.
Here are four errors for the using of the battery. All should pay attention:
1. Not charged with the new battery for the first use
Battery charged at the first time is called the first charge, which has a big influence for the battery life of your car. If not charged, and used directly, the capacity if the battery will be not large enough and shorten the battery life. While if charged directly, it will also shorten the battery life. In general, the first charging of the battery is after filling the electrolyte, and use a small current to charge it for about one hour and then you can use it.
2. Ignore the vent of battery
The vent of the new battery cover is usually sealing, when using you must first remove the adhesive paper, otherwise the air vent cannot be ruled out the gas during the chemical reactions, and will lead to an explosion because of the high pressure.
3. Too freely to add distilled water for the battery
Usually after adding the water for the accumulator, you must let the car run for a period of time, and charge the battery through the generator, making the distilled water and electrolyte fully mixed, and then the battery performance will not be affected. Well, after a long time of driving, we suggest you to use a king of tool to make a full checking for your car, including the battery life, such as the Autel MaxiSys Pro MS908P and Launch X431 IV GX4 Master Auto Diagnostic Tool, both are the best choice for you. Conversely, if not running after adding distilled water, distilled water and electrolyte will not be fully mixed, and it can cause the battery self-discharged or damage battery polarity.
4. Battery charge capacity not matched with the engine
If the charge capacity and engine don't match, battery charge quantity is small, the startup resistance increase, battery will put severe electricity, and is sure to shorten the battery life. If charging a small car with large capacity, the active substance will not be fully used, as a result, it will lead to a decline in economy. When loading, the battery is based on the starter battery power, voltage and the load of electrical equipment, so in exchange, it is important to note that matching the engine charge capacity.
Well, for more detailed information about the car maintenance please continue to pay attention to our Auto Diagnostic Tool Online Store and we will upload the latest and most practical knowledge for maintaining your loved car for you.
Source: http://www.focalobd.com/blog/use-and-maintenance-guide-of-car-battery/
Well, how to judge whether the battery need charged, and not make it in a state of loss of electricity? You can determine the working state of the battery by the brightness of the headlights or the strength of the stereo sound. If you wait until the brightness of the light become dark, the power storage would have entered into a state of loss of electricity and unable to start. In order to guarantee the normal work of the battery car owners should better start the engine to recharge it for every half an hour after the using of the battery.
Here are four errors for the using of the battery. All should pay attention:
1. Not charged with the new battery for the first use
Battery charged at the first time is called the first charge, which has a big influence for the battery life of your car. If not charged, and used directly, the capacity if the battery will be not large enough and shorten the battery life. While if charged directly, it will also shorten the battery life. In general, the first charging of the battery is after filling the electrolyte, and use a small current to charge it for about one hour and then you can use it.
2. Ignore the vent of battery
The vent of the new battery cover is usually sealing, when using you must first remove the adhesive paper, otherwise the air vent cannot be ruled out the gas during the chemical reactions, and will lead to an explosion because of the high pressure.
3. Too freely to add distilled water for the battery
Usually after adding the water for the accumulator, you must let the car run for a period of time, and charge the battery through the generator, making the distilled water and electrolyte fully mixed, and then the battery performance will not be affected. Well, after a long time of driving, we suggest you to use a king of tool to make a full checking for your car, including the battery life, such as the Autel MaxiSys Pro MS908P and Launch X431 IV GX4 Master Auto Diagnostic Tool, both are the best choice for you. Conversely, if not running after adding distilled water, distilled water and electrolyte will not be fully mixed, and it can cause the battery self-discharged or damage battery polarity.
4. Battery charge capacity not matched with the engine
If the charge capacity and engine don't match, battery charge quantity is small, the startup resistance increase, battery will put severe electricity, and is sure to shorten the battery life. If charging a small car with large capacity, the active substance will not be fully used, as a result, it will lead to a decline in economy. When loading, the battery is based on the starter battery power, voltage and the load of electrical equipment, so in exchange, it is important to note that matching the engine charge capacity.
Well, for more detailed information about the car maintenance please continue to pay attention to our Auto Diagnostic Tool Online Store and we will upload the latest and most practical knowledge for maintaining your loved car for you.
Source: http://www.focalobd.com/blog/use-and-maintenance-guide-of-car-battery/
2015年3月11日星期三
Five Problems of Air Conditioning System
In hot summer, it is a necessary to use the air conditioning. However, most of car owners do not pay more attention of the automobile air conditioning maintenance. Just using and never think of the maintaining methods, after a long time, it is sure to lead to problems with the air conditioning of your loved car. Maybe you are still not sure whether your car air conditioning can work well or has been damaged by improper use, and then you should have it fully checked with a kind of OBD Diagnostic Tool for diagnosis. Well, what problems will usually appear on the car air conditioning?
1. Clean water tank and condenser
Water tank and condenser are the important parts of the vehicle cooling system and air conditioning. With the long time of using, dust, sand and catkin will be mixed in the gap between the two, as a result, it will influence the water temperature and the performance of air conditioning refrigeration.
2. Check the air pressure and change refrigerant
First, check it is the high pressure test tube or low pressure test tube, and connected with the fluoride pressure test table, after that, start your car with a lower speed. And then turn on the air conditioning switch, and turn it up to the maximum for checking, the checking result should not be more than 300 under the idling situation and no less than 60.
3. How to choose the best oil viscosity in summer?
Many car owners may complain about using more oil. In fact, in summer, they can choose the low viscosity lubricating oil in the summer, of course, which can be just used under the situation of good shape, smaller wear. While for the cars that have run too long, and with an older age, it is better to use the lubricating oil with bigger viscosity.
4. How to clean the air flue and replace filter?
The original filter life of the automobile is 12000 kilometers once a time under normal use. It is very simple to clean the air flue of the car. Block the air outlet up with wet towel, and adjust the speed to the maximum, thus the dust will be absorbed on the towel. In addition, you can also use the air conditioning duct cleaning agent, added with the high pressure air gun and clean it for two or three times so that you can gain the purpose of cleaning. As we know, good filter is sure to be very important for the normal operation of your car. Here we suggest you to go to an online car diagnostic tool shop for help, and choosing the best tools for checking, such as Autel MaxiDas DS708, Launch X431 Diagun III, Launch X-431 PAD Auto Diagnostic Tool, etc
5. How to get rid of the musty of the air conditioning?
Some car owners may find that there will be a smell of musty on the air outlet when turning on the air conditioning, this is because you have not cleaned up the air flue in time. The most simple method to solve it is to clean the air flue, also you can make it with the help of the air conditioning duct cleaning agent. Moreover, after using the air conditioning, you should not shut in down immediately, instead, keeping the air switch on about 5 minutes.
Besides, you should also pay more attention to the use of the circulatory system both inside or outside the car during hot summer. Lots of cars use the manual air conditioning, when adopting the outside loop, wind will be entered into the car conditioning from the outside of the car, while the inner circulatory can be only used by the inner loop.
Source: http://www.focalobd.com/blog/five-problems-of-air-conditioning-system/
1. Clean water tank and condenser
Water tank and condenser are the important parts of the vehicle cooling system and air conditioning. With the long time of using, dust, sand and catkin will be mixed in the gap between the two, as a result, it will influence the water temperature and the performance of air conditioning refrigeration.
2. Check the air pressure and change refrigerant
First, check it is the high pressure test tube or low pressure test tube, and connected with the fluoride pressure test table, after that, start your car with a lower speed. And then turn on the air conditioning switch, and turn it up to the maximum for checking, the checking result should not be more than 300 under the idling situation and no less than 60.
3. How to choose the best oil viscosity in summer?
Many car owners may complain about using more oil. In fact, in summer, they can choose the low viscosity lubricating oil in the summer, of course, which can be just used under the situation of good shape, smaller wear. While for the cars that have run too long, and with an older age, it is better to use the lubricating oil with bigger viscosity.
4. How to clean the air flue and replace filter?
The original filter life of the automobile is 12000 kilometers once a time under normal use. It is very simple to clean the air flue of the car. Block the air outlet up with wet towel, and adjust the speed to the maximum, thus the dust will be absorbed on the towel. In addition, you can also use the air conditioning duct cleaning agent, added with the high pressure air gun and clean it for two or three times so that you can gain the purpose of cleaning. As we know, good filter is sure to be very important for the normal operation of your car. Here we suggest you to go to an online car diagnostic tool shop for help, and choosing the best tools for checking, such as Autel MaxiDas DS708, Launch X431 Diagun III, Launch X-431 PAD Auto Diagnostic Tool, etc
5. How to get rid of the musty of the air conditioning?
Some car owners may find that there will be a smell of musty on the air outlet when turning on the air conditioning, this is because you have not cleaned up the air flue in time. The most simple method to solve it is to clean the air flue, also you can make it with the help of the air conditioning duct cleaning agent. Moreover, after using the air conditioning, you should not shut in down immediately, instead, keeping the air switch on about 5 minutes.
Besides, you should also pay more attention to the use of the circulatory system both inside or outside the car during hot summer. Lots of cars use the manual air conditioning, when adopting the outside loop, wind will be entered into the car conditioning from the outside of the car, while the inner circulatory can be only used by the inner loop.
Source: http://www.focalobd.com/blog/five-problems-of-air-conditioning-system/
2015年3月10日星期二
5 Elements for Car Maintenance in Spring
After a long winter, there are different degrees of aging with the auto parts, and a wide range of bacteria will also be more alive with the increasing of the temperature and the humidity. If not timely clean up the air inside the car, there is more likely to be infected with the respiratory tract disease. And after the Spring Festival, lots of people have the plan to go for travelling, if not check and maintain your car, it will be at the risk of danger. However, it can be avoided to a certain extent if you can get the help with a kind of the auto diagnostic tool, which is sure to help you diagnose your car in advance and make sure what problems it has so that you can take appropriate protective measures.
1. Change the Oil
As we know, engine is the heart of a car, and oil is the blood of the heart, so changing the oil frequently is very important for car maintenance. It is the best choice to use the oil which can be used commonly both in winter and summer. While for some places that winter is much colder and summer is much hotter, it will be much better to use different oils according to the sean.
2. Clean the Air inside the car
The source of bacteria and mite bug inside the car is mainly from dust and the residue of food. There are two methods for cleaning: steam sterilization and light catalyst. Steam sterilization is align the air nozzle of the steam engine to ceiling, chairs, velvet, air-conditioning tuyere, instrument desk, trunk, and make the use of the steam with up to 130℃ high temperature to kill the harmful bacteria inside your car, and get rid of the bad taste in the air.
3. Two filters and timely remove dust
If too dirty with the parts of the car, it will make a bad effect for the filter. And too mainly impurity will insert into the oil cylinder, and will increase the wear of the parts, as well as increase the possibility of the failure. If serious congestion, it will also lead to vehicle can't work normally.
During the use, when air quality is generally good, you can change air filter regularly according to the maintenance cycle. While under poor air quality, you need to pay attention to the cleaning of the air filter. As for the air-conditioning filter, in the processing of using, you also should clean or replace it regularly, or even turned on lower temperature, you will still not feel cold, and some vehicles even can have peculiar smell inside the car.
4. Check the car chassis
Because spring is always both hot and cold, and all the parts of the auto parts often heat bilges and cold shrink, as a result, the screw will be eased. So, you should pay a special attention to check the chassis, especially before travelling, it is necessary to check the chassis more thoroughly. Well, if you are not sure of how to checking the chassis or wonder about he other parts of the car, we suggest you to use a Autel MaxiDAS DS708 or Launch X431 GDS Auto Diagnostic Tool for help.
5. Check the tires and braking system
Because it is cold in winter, the tire rubber will be harder and have a big wear. So before the travel in Spring, you must check the damaging situation of it. You should also adjust the adhesion on the ground of the four tires and make it consistent, to avoid slippery because of rain and sideslip. Moreover, you should also check the brake fluid, brake line and each brake wheel cylinder if there is any leakage, making sure whether it is safe and effective with the automobile brake system.
Source: http://www.focalobd.com/blog/5-elements-for-car-maintenance-in-spring/
1. Change the Oil
As we know, engine is the heart of a car, and oil is the blood of the heart, so changing the oil frequently is very important for car maintenance. It is the best choice to use the oil which can be used commonly both in winter and summer. While for some places that winter is much colder and summer is much hotter, it will be much better to use different oils according to the sean.
2. Clean the Air inside the car
The source of bacteria and mite bug inside the car is mainly from dust and the residue of food. There are two methods for cleaning: steam sterilization and light catalyst. Steam sterilization is align the air nozzle of the steam engine to ceiling, chairs, velvet, air-conditioning tuyere, instrument desk, trunk, and make the use of the steam with up to 130℃ high temperature to kill the harmful bacteria inside your car, and get rid of the bad taste in the air.
3. Two filters and timely remove dust
If too dirty with the parts of the car, it will make a bad effect for the filter. And too mainly impurity will insert into the oil cylinder, and will increase the wear of the parts, as well as increase the possibility of the failure. If serious congestion, it will also lead to vehicle can't work normally.
During the use, when air quality is generally good, you can change air filter regularly according to the maintenance cycle. While under poor air quality, you need to pay attention to the cleaning of the air filter. As for the air-conditioning filter, in the processing of using, you also should clean or replace it regularly, or even turned on lower temperature, you will still not feel cold, and some vehicles even can have peculiar smell inside the car.
4. Check the car chassis
Because spring is always both hot and cold, and all the parts of the auto parts often heat bilges and cold shrink, as a result, the screw will be eased. So, you should pay a special attention to check the chassis, especially before travelling, it is necessary to check the chassis more thoroughly. Well, if you are not sure of how to checking the chassis or wonder about he other parts of the car, we suggest you to use a Autel MaxiDAS DS708 or Launch X431 GDS Auto Diagnostic Tool for help.
5. Check the tires and braking system
Because it is cold in winter, the tire rubber will be harder and have a big wear. So before the travel in Spring, you must check the damaging situation of it. You should also adjust the adhesion on the ground of the four tires and make it consistent, to avoid slippery because of rain and sideslip. Moreover, you should also check the brake fluid, brake line and each brake wheel cylinder if there is any leakage, making sure whether it is safe and effective with the automobile brake system.
Source: http://www.focalobd.com/blog/5-elements-for-car-maintenance-in-spring/
2015年3月8日星期日
Car Maintenance Skills for Special Parts
With faster speed of car entering families, how to maintain your car has become one of the most concerned topics. If you are a new car owner, for the sake of your safety and prolonging the life of your car, you’d better go to an Online Auto Diagnostic Tool Store for a full checking for your loved cars regularly. Apart from regularly do the routine maintenance in the repair stores, it is also need to pay attention to the maintenance of some small places, which will also connect with the comfort and safety for you when driving.
Skill 1: Dashboard needs Carefully Cleaned
One of the most important inner car accessories is the dashboard, the degree of cleaning will directly affect the driver's health and the customers’ visual perception for the whole effect of the inner environment of the car. Whether the dashboard of your car can still work is directly related to the safe for driving. So we sincerely suggest you to use a kind of Autel Diagnostic Tools to check the performance of your car, such as Autel MaxiDas DS708, Autel MaxiSys Mini MS905 Automotive Diagnostic, etc.
On the other hand, the dashboard has a very complex structure, so it is very difficult to clean. However, if you more attention on the dashboard, you will find there is very little parts that can be cleaned just by cloth and sponge, some parts still need the special tools to clean.
With the different thickness of wood or a ruler, and fix its head into a diagonal triangle, rectangle or sharp, and then wrap up with clean cloth. It can not be more perfect to clean the dashboard, which will not only improve the cleaning effect, but also not damage the parts that will be cleaned.
Skill 2: Carpet Washing Skills
The easiest part to be dirty of the car is the carpet. If do vacuuming processing with the dust collector with brush head, it will make it less dirty than before. While for more dirty carpet, you have to use the special detergent. In general, you should firstly do the dust removal, and then spray the right amount of detergent, and clean it with the brush, at last scrub the excess detergent with cleaning cloth, which will make the carpet both clean and soft as former.
However, what you should also pay attention is not to wash the car carpet completely dipped in the water. On one hand, it will damage the adhesive of several layers of different materials of the carpet, on the other hand, it will also make the carpet not be dry at a long time and affect the use effect, and make the inner of the car wet.
Source: http://www.focalobd.com/blog/car-maintenance-skills-for-special-parts/
Skill 1: Dashboard needs Carefully Cleaned
One of the most important inner car accessories is the dashboard, the degree of cleaning will directly affect the driver's health and the customers’ visual perception for the whole effect of the inner environment of the car. Whether the dashboard of your car can still work is directly related to the safe for driving. So we sincerely suggest you to use a kind of Autel Diagnostic Tools to check the performance of your car, such as Autel MaxiDas DS708, Autel MaxiSys Mini MS905 Automotive Diagnostic, etc.
On the other hand, the dashboard has a very complex structure, so it is very difficult to clean. However, if you more attention on the dashboard, you will find there is very little parts that can be cleaned just by cloth and sponge, some parts still need the special tools to clean.
With the different thickness of wood or a ruler, and fix its head into a diagonal triangle, rectangle or sharp, and then wrap up with clean cloth. It can not be more perfect to clean the dashboard, which will not only improve the cleaning effect, but also not damage the parts that will be cleaned.
Skill 2: Carpet Washing Skills
The easiest part to be dirty of the car is the carpet. If do vacuuming processing with the dust collector with brush head, it will make it less dirty than before. While for more dirty carpet, you have to use the special detergent. In general, you should firstly do the dust removal, and then spray the right amount of detergent, and clean it with the brush, at last scrub the excess detergent with cleaning cloth, which will make the carpet both clean and soft as former.
However, what you should also pay attention is not to wash the car carpet completely dipped in the water. On one hand, it will damage the adhesive of several layers of different materials of the carpet, on the other hand, it will also make the carpet not be dry at a long time and affect the use effect, and make the inner of the car wet.
Source: http://www.focalobd.com/blog/car-maintenance-skills-for-special-parts/
订阅:
博文 (Atom)














